System-sensor V4R24ADA Series Speaker_Strobes Manuel d'utilisateur télécharger pdf

D900-02-00 1 I56-655-03

V4R24ADA Series Speaker/Strobes

for Fire Protective Signaling Systems

INSTALLATION AND MAINTENANCE INSTRUCTIONS

A Division of Pittway

3825 Ohio Avenue, St. Charles, Illinois 60174

1-800-SENSOR2, FAX: 630-377-6495

General

The National Fire Protection Association has published

standards and recommended practices for the installation

and use of the appliances described in these instructions. It

is recommended that the installer become familiar with

these standards and practices, local codes, and any special

requirements of the authority having jurisdiction.

The speakers can operate at any one of four input power

levels at either of two input voltages. The system voltage

and sound power levels are selected at the time of installa-

tion, but can be changed, if necessary.

Strobe

Specifications

Speaker

Frequency Range: 400 Hz to 4000Hz

Supervision: Capacitive input for supervisory DC voltage

Mounting: Standard 4" X 4" electrical box

Surface mount directly to box

Semiflush mount, using model MP-SF or MP-SFB

Model Supply

Voltage

Range

Operating Current from

Regulated Supply

Operating Current from Full-Wave 

Rectified Unfiltered Supply

Average

Operating 

Current

Average

Operating 

Current

(mArms)

Peak

Current

(mA)

20Vrms/

30Vrms

Peak

Current

(mA)

20/30V

Inrush

Current

(mA in

access

of Peak)

Inrush

Current

(Amps in

excess

of Peak)

V4R24110ADA

V4R2475ADA

V4R2415ADA

V4R241575ADA

20-30V 210 470/500 0 245 400/500 0.08

20-30V 170 385/400 0 200 320/370 0.04

20-30V 75 160/180 0 90 275/290 0.02

20-30V 93 210/220 0 120 275/290 1.0

NOTE: Inrush current duration is less than 20 microseconds (.00002 seconds).

Input

Voltage

(Vrms)

Power

Tap

(Watts)

Minimum Output (dBA)

Reverberant

Anechoic

@ 10 ft.

25 or 70.7 1/4 75 78

25 or 70.7 1/2 78 81

25 or 70.7 1 81 84

25 or 70.7 2 84 87

The speaker is also equipped with a capacitive input to al-

low for DC supervision.

An attached 24 VDC strobe at 110, 75, 15, or 15/75 candela

(cd) is also included with the speaker. Although they are

assembled into a unit, the strobe and speaker are electri-

cally independent and require separate power sources.

Strobes can be powered by means of a full-wave rectified

unfiltered supply.

1 2 3 4

Résumé du contenu

Page 1 - A Division of Pittway

D900-02-00 1 I56-655-03V4R24ADA Series Speaker/Strobesfor Fire Protective Signaling SystemsINSTALLATION AND MAINTENANCE INSTRUCTIONSA Division of Pitt

Page 2 - D900-02-00 2 I56-655-03

D900-02-00 2 I56-655-03The light output rating of the Model V4R24110ADA is 110cd; the V4R2475ADA is 75 cd; the V4R2415ADA is 15 cd.The light output ra

Page 3 - D900-02-00 3 I56-655-03

D900-02-00 3 I56-655-03C. Semiflush Wall Mount(a) System Sensor semiflush mounting plates areshipped with #8 nuts already installed from theback.(b) A

Page 4

D900-02-00 4 I56-655-03 © System Sensor 1996If the power option plug is not plugged into one of the option positions,the speaker will not sound and th

Commentaires sur ces manuels

Pas de commentaire

System-sensor V4R24ADA Series Speaker_Strobes Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement System-sensor V4R24ADA Series Speaker_Strobes. System Sensor V4R24ADA Series Speaker_Strobes User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement System-sensor V4R24ADA Series Speaker_Strobes