System-sensor FAAST Networking Manuel d'utilisateur télécharger pdf (Page 13)

User Guide: FAAST Fire Alarm Aspiration Sensing Technology® Networking

4. Click the Network tab to display the network parameters.

5. Connect to the detector by right-clicking and selecting Connect Device.

6. In the Connect window, ensure the correct IP address for the detector is entered in the Host ﬁeld. Change the User from

Read-Only to Administrator. Finally, enter the password for the detector in the Password ﬁeld. The default password is

“password”. Click Connect.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Pas de commentaire

System-sensor FAAST Networking Manuel d'utilisateur Page 13