System-sensor BEAMLRK Manuel d'utilisateur télécharger pdf

INSTALLATION AND MAINTENANCE INSTRUCTIONS

BEAMLRK

Long Range Kit for use with

Reﬂective Projected Beam Smoke Detectors

3825 Ohio Avenue, St. Charles, Illinois 60174

800/736-7672, FAX: 630/377-6495

www.systemsensor.com

D400-77-00 1 I56-2359-001

Notice: This manual should be left with the owner/user of this equipment.

GENERAL DESCRIPTION

The BEAMLRK allows reflected beam detectors to be installed at separations

between 230 and 328 feet (70 to 100 meters). At these distances, four 8˝ ×

8˝ reflectors must be used to provide enough reflected infrared light. This

kit includes 3 additional reflectors with new test scale legends. The reflector

included with the transmitter/receiver unit is the fourth reflector to be used.

This kit is not compatible with the multi-mount kit (BEAMMMK).

The kit includes the following parts:

Qty. Description

1 8˝ × 8˝ reflector (10% to 25% test scale)

1 8˝ × 8˝ reflector (30% to 65% test scale)

1 8˝ × 8˝ reflector (no test scale)

MOUNTING INSTRUCTIONS

1. Peel off the test scale sticker from the reflector included with the trans-

mitter/receiver unit.

2. Securely mount all four reflectors to the wall using all four screw holes

on each reflector. (see Mounting Instructions section of the manual in-

cluded with the transmitter/receiver unit for more details). The reflectors

should be mounted as close to each other as possible. They should be

mounted in a square pattern as indicated in Figure 1. The upper left

reflector when viewed from the front should contain the lower test scale

(10 to 25%). The upper right reflector should contain the higher test

scale (30 to 65%). The bottom reflectors do not have a scale on them.

3. Complete the installation of the transmitter/receiver unit using the in-

structions included with the beam detector.

4. Test the system as indicated in the beam detector instructions. (see “Sen-

sitivity Testing” section of the transmitter/receiver instructions).

FIGURE 1:

C0316-00

I56-2359-001

BEAMLRK 1
Long Range Kit for use with 1

Résumé du contenu

Page 1 - Long Range Kit for use with

INSTALLATION AND MAINTENANCE INSTRUCTIONSBEAMLRK Long Range Kit for use with Reﬂective Projected Beam Smoke Detectors3825 Ohio Avenue, St. Charles,

Commentaires sur ces manuels

Pas de commentaire

System-sensor BEAMLRK Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement System-sensor BEAMLRK. System Sensor BEAMLRK User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement System-sensor BEAMLRK