System-sensor FAAST Networking Manuel d'utilisateur télécharger pdf (Page 15)

User Guide: FAAST Fire Alarm Aspiration Sensing Technology® Networking

9. When the desired IP settings have been entered, click the Save icon:

10. The following message will appear:

If all settings are correct, select Ye s to send the new conﬁguration to the detector. If you would like to make further changes,

select No.

Note: To send the conﬁguration to the detector manually, right-click on the device and select Send Conguration.

11. After receiving the conﬁguration, the detector will shut down and restart. The detector will then begin operating using the

new IP address.

LAN Connection

To fully realize the potential of the networking features offered by the FAAST detec-

tor, connection to a Local Area Network (LAN) is recommended. When connected

to a LAN, other computers can connect to the detector for remote monitoring ei-

ther using a Web browser or the PipeIQ software. If remote access to a LAN is

provided by a Virtual Private Network (VPN), this remote monitoring can take place

from virtually anywhere you can access the Internet. If an e-mail server resides in

the LAN, FAAST can be conﬁgured to forward e-mail notiﬁcations via this server.

Connecting the FAAST detector to a LAN requires knowledge of the local network

topology, conﬁguration, and security policy. With this information, the appropriate

IP and e-mail settings for the FAAST detector can be selected. Because network-

ing environments vary widely, your local IT professional will be in the best position

to integrate the detector into existing infrastructure. If you are unsure how to pro-

ceed with a permanent network deployment, contact your network administrator

for assistance.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Pas de commentaire

System-sensor FAAST Networking Manuel d'utilisateur Page 15